Model Number

C-58

C-58 Series Printing Ink

Carpoly C-58 series is specially developed for printing on special and untreated polypropylene materials or half treated polyethylene materials. It is a special single component printing ink with the advantages of volatilizing drying, high gloss, strong adhesion and scratching resistance.    

1. Application scope竊�/span>commonly used in printing on polyolefin materials such as treated or untreated PP��/span>OPP��/span>BOPP��/span>PP synthetic paper, PP foams, KT board, YUPO paper and treated PE etc. It can also be used for materials such as nacreous paper and treated PET etc. 

2. Performance characteristics竊�/span>C-58 series is one of the high quality printing ink with high gloss, middle drying speed, super strong alchohol tolerance, excellent adhesion, excellent scratching resistance, rich in color; and can be used in high speed printing without ink flying or blurring. It can also meet the requirements of pad-printing process.

3. Technical parameters:

4竊�/span>Usage:

a. In order to prevent from possible separation due to the application of the special agent in the printing ink, please fully mix the printing ink to uniformity before the application.

b. Before printing, it is necessary to clean the stains and dusts on the surface of the object.

c. Please choose one of the thinner ranged in fast, middle and low drying speed according to the actual working environment.

d. Please choose the prompt printing film stencil (77lines-150lines/cm) according to the expected print results.

e. In order to reach the excellent print results of tiny lines, patterns and characters, you can add some J-58-100 easy-congeal ointment, thus to avoid diffusion, burrs, and blurring of the print layers.

5.Notes竊�/span>

a. Please conduct a trial before printing so as to avoid quality failure causing from materials differences.

b. If the adherence is bad after the printing, or if the printing process is bad, it may highly be caused by the floating parts of the added plastic agent or other addictive on the surface of the plastic, or might be reason of static electricity. The suggestion is: clean with alcoholic or white gas.

c. The dosage of thinner is within range 20%-30%; this is fully decided by the dots number of the film stencil, environmental conditions and printing requirements.

d. Due to the differences of materials, there might be some differences in drying, please set the drying method and drying time according to special purposes to ensure the print quality.

e. Before and after using this ink series, please seal the ink container tightly and place it in cool area with good air-flowing so as to prevent from fire or high temperature.

f. The quality guarantee time for this series is 1 year from the day of the production. Please make sure again the performance of this product before application if it exceeds this guarantee period.

Note: the above test result data of the resistance are under testing condition of our company; please note that this can? be regarded as a guarantee to the actual use.