Model Number

C-49

C-49 Series Printing Ink

Carpoly C-49 series self-drying printing ink is developed for treated or untreated PET films, sheet materials, self-adhesive paper etc. It can provide excellent adhesion and flexibility, alcohol and gasoline resistance; meanwhile, it can satisfy fine printing of all kind of paster.

1．             Application scope: treated or untreated PET materials that normally require printing process; all kind of label paster such as film switch, escutcheon, inscription board etc, as well as water-washing products of vacuum galvanized coatings, and also on motor paster which that without any brightening requirements. 

2．             Performance characteristics: to the untreated PET (hard in printing on it), C-49 series printing ink is excellent in adhesion, lubricous and smooth of the overlays, bright in color, and it can meet the requirements of thermo-forming.

3．             Technical parameters:

4．Usage:

a. In order to prevent from possible separation due to the application of the special agent in the printing ink, please fully mix the printing ink to uniformity before the application.

b. Before printing, it is necessary to clean the stains and dusts on the surface of the object.

c. Please choose one of the thinner ranged in fast, middle and low drying speed according to the actual working environment.

d. Please choose the prompt printing film stencil (77lines-150lines/cm) according to the expected print results.

e. In order to reach the excellent print results of tiny lines, patterns and characters, you can add some J-49100 easy-congeal ointment, thus to avoid diffusion, burrs, and blurring of the print layers.

5．Notes：

a. Please conduct a trial before printing to avoid quality failure causing from materials differences.

b. If the adherence is bad after the printing, or if the printing process is bad, it may highly be caused by the floating parts of the added plastic agent or other addictive on the surface of the plastic, or might be reason of static electricity. The suggestion is: clean with alcoholic or white gas.

c. The dosage of thinner is within range 20%-30%; this is fully decided by the dots number of the film stencil, environmental conditions and printing requirements.

d. Due to the differences of materials, there might be some differences in drying speed, please set the drying method and drying time according to special purposes to ensure the print quality.

e. Before and after using this ink series, please seal the ink container tightly and place it in cool area with good air-flowing so as to prevent from fire or high temperature.

f. The quality guarantee time for this series is 1 year from the date of the production. Please make sure again the performance of this product before application if it exceeds this guarantee period.

Note: the above test result data of the resistance are under testing condition of our company; please note that this can? be regarded as a guarantee to the actual use.