Model Number

C-13

C-13 Series Printing Ink

         Carpoly C-13 series is single component printing ink with high performance and dried by volatilizations. It is special developed to integrate all the advantages of better brightness, good resistances, high printing capability, and excellent adhesion. Further more, it has bright color, good flowing and moderate dryness.

1. Application range: related products like labels, inscription boards, crash helmets, light boxes, paper or some others of regular hard and soft PVC board, sheet materials, transparent films, thermoplastic materials such as PMMA, ABS, PC, PETG, some of the PS, treated PET.

2. Characteristics: C-13 series has moderate drying speed, good anti-back sticking, relative good brightness, excellent adhesion;  good chemical resistance such as alcohol, gasoline and glue resistances; meanwhile, because its excellent toughness and high temperature resistance, it can be vacuumed and formed under high temperature without breaking of surface or colors.

3. Technical parameters:

4. Usage:

a. In order to prevent from possible separation due to the application of the special agent in the printing ink, please fully mix the printing ink to uniformity before the application.

b. Before printing, it is necessary to clean the stains and dusts on the surface of the object.

c. Please choose one of the thinner ranged in fast, middle and low drying speed according to the actual working environment.

d. Please choose the prompt printing film stencil (77lines-150lines/cm) according to the expected print results.

e. In order to reach the excellent print result of tiny lines, patterns and characters, you can add some J-13-100 easy-congeal ointment, thus to avoid diffusion, burrs, and blurring of the print layers.

5. Notice:

a. Please conduct a trial before printing so as to avoid quality failure causing from materials differences.

b. If the adherence is bad after the printing, or if the printing process is bad, it may highly be caused by the floating parts of the added plastic agent or other addictive on the surface of the plastic, or might be reason of static electricity. The suggestion is: clean with alcoholic or white gas.

c. The dosage of thinner is within range 20%-30%; this is fully decided by the dots number of the film stencil, environmental conditions and printing requirements.

d. Due to the differences of materials, there might be some differences in drying, please set the drying method and drying time according to special purposes to ensure the print quality.

e. Before and after using this ink series, please seal the ink container tightly and place it in cool area with good air-flowing so as to prevent from fire or high temperature.

f. The quality guarantee time for this series is 1 year from the date of the production. Please make sure again the performance of this product before application if it exceeds this guarantee period.

Note: the above test result data of the resistance are under testing condition of our company; please note that this can? be regarded as a guarantee to the actual use.